LUNA2000-100KTL-M1 Smart Power Control System
User Manual
After cleaning is complete, reinstall the air inlet baffle. Tighten the screws to a
torque of 1.2 N·m.
Removing the Air Outlet Protective Cover
Figure 8-2 Removing the protective cover
After cleaning is complete, reinstall the air outlet protective cover. Tighten the
screws to a torque of 1.2 N·m.
8.2 System Power-Off
Precautions
To prevent personal injury and equipment damage, perform the following
procedure to power off the Smart PCS for troubleshooting or replacement.
● Do not open the panel for maintenance if the Smart PCS is emitting abnormal
● If the Smart PCS does not emit abnormal smell or smoke and is intact, repair or
Issue 07 (2023-07-15)
NO TICE
NO TICE
WARNING
smell or smoke, or has obvious exceptions.
restart it based on the alarm handling suggestions.
Copyright © Huawei Technologies Co., Ltd.
8 Device Maintenance
61