Parameter & Description
*
IP Address
Specifies the IP address of the card.
*
Group No.
Specifies the number of the gateway group to which
the gateway entry belongs.
Grouping is useful when there is more than one card
installed in a PBX, because it allows you to use the
automatic route redirection feature. For details, refer to
"Detailed Explanations" in the next section, "2.2.7
Address Translation Table—DN2IP Entry".
Default
Value Range
No default
The following addresses
are invalid:
•
•
•
0
0 (belong to no group),
1 to 256
2.2 Programming
Class D addresses
Class E addresses
Loopback
addresses
Programming Guide
33