Table of Contents
Advertisement
Parameter & Description
*
Inter-Digit Time (s) 1-10s
Specifies the length of time (in seconds) within which
subsequent digits of a dial number must be dialled.
Generally, there is no need to change the default value.
*
Digit End Code
Specifies the delimiter code to be used to signal the
end of a dial number.
Generally, there is no need to change the default value.
Others
Parameter & Description
Network CODEC of IP-PBX
The value of this parameter is set automatically as
appropriate to the setting of the PBX.
There is no need to change the value.
Default
Value Range
5
1 to 10
#
0 to 9, #, *
Default
Value Range
Not applicable
G.711 Mu-Law,
G.711 A-Law
2.2 Programming
Programming Guide
25
Advertisement
Table of Contents
