Table of Contents
Advertisement
Installation Instructions
1. Fit the two plastic wall spacers
supplied onto the condenser at the
back of the appliance by rotating 1/4
turn.
2. Locate the appliance on a
smooth surface.
3. To ensure it is standing upright
adjust the two front feet by turning
clockwise or anti-clockwise, until it is
in firm contact with the floor. Correct
adjustment of feet avoids excessive
vibration and noise.
4. A special receptacle is supplied
to store the mains plug during transit.
The receptacle is fixed at the back
of the cabinet on the side of the
compressor. Gently remove the plug
from the receptacle. Never pull the
mains cord, you may damage the
Plug receptacle
appliance. In case of transportation,
ensure you locate the plug in the
receptacle provided to avoid transit
damage.
5. The space in the room where
the appliance is installed must not be
smaller than 10 cubic metres.
Changing the illumination
lamp
To change the Bulb/LED used for
illumination of your refrigerator, call your
AuthorisedService.
The lamp(s) used in this appliance
is not suitable for household room
illumination. The intended purpose of
this lamp is to assist the user to place
foodstuffs in the refrigerator/freezer in
a safe and comfortable way.The lamps
used in this appliance have to withstand
extreme physical conditions such as
temperatures below -20 °C.
(only chest and upright freezer)
WARNING:
Do not locate extension sockets or
charging transformers/power supplies
or
Lithium-Iron
products adjacent to the compressor
as they could overheat.
12
EN
battery
operated
Advertisement
Table of Contents
