ABB Protect IT REL 501 2.5 Series Operator's Manual page 31







24
Settings
6HWWLQJV
*HQHUDO
Use this menu to select and set the different parameters for included protection and con-
trol functions in the REx 5xx terminal. There are four selectable and editable settings
group, each independent of the other, to structure desired functions and applications.
'LVWXUE5HSRUW
This menu includes all setting parameters for the disturbance report. The following fea-
tures are available:
6HTXHQFH QXPEHU can be set for each recorded disturbance.
•
6DPSOLQJ UDWH is fixed at 1000 Hz.
•
5HFRUGLQJ WLPHV for pre-fault, post-fault and time limit shall be set.
•
)DXOW ORFDWRU VHWWLQJV shall be done here. It includes measurement duration and
•
presentation of the result.
)XQFWLRQV
Settings of the parameters for the included protection and control functions are done
here. Four separate setting groups are avaible. First select desired group and then de-
sired function.
&KDQJH$FW*US
To set the internal time in the REx 5xx terminal. The time is set in the form of YYYY-
MMM-DD and hh:mm:ss. All values but the month are presented with digits. The
month are presented with the first three letters in current month.
7LPH
To set the internal time in the REx 5xx terminal. The time is set in the form of YYYY-
MMM-DD and hh:mm:ss. All values but the month are presented with digits. The
month are presented with the first three letters in current month.
&KDSWHU 
8QGHUVWDQG WKH +0, WUHH