Table of Contents
Advertisement
Chapter 3 Setup
3.2
EXPRESSSCOPE ENGINE 3 Network Configuration
To use EXPRESSSCOPE Engine 3 through the network, follow the steps below.
1.
Turn on the server and wait until the following message appears on the lower left of the screen. See
Chapter 3 (1.1.1 POST sequence) for details.
Press <F2> SETUP, <F3> Internal Flash Memory, <F4> ROM Utility, <F12> Network
2.
When you press <F4> key during displaying the message or NEC logo, ROM utility starts upon completion
of POST.
3.
The keyboard selection menu appears. Choose your keyboard type.
4.
On the Off-line TOOL MENU, choose BMC Configuration, BMC Configuration, Network, and then
Property.
Express5800/T110g-E User's Guide
3. EXPRESSSCOPE ENGINE 3
125
Advertisement
Table of Contents
