Table of Contents
Advertisement
Chapter 3 Setup
3.2
EXPRESSSCOPE ENGINE 3 Network configuration
Below is an example of the configuration procedure which enables EXPRESSSCOPE Engine 3 to be used via a
web browser.
1. Run POST according to Chapter 3 (1.1.1 POST process). After a while, the following message appears
on the lower left of the screen. (* The on-screen message depends on your system environment.)
Press <F2> SETUP, <F4> ROM Utility, <F12> Network
2. Press the <F4> key to launch Off-line TOOL while the message is displayed.
3. Select your keyboard type on keyboard selection screen.
4. When the Off-line TOOL MENU appears, select BMC Configuration, BMC Configuration, Network:
CPU/IO module 0/1, and then IPv4 Property or IPv6 Property.
Express5800/R310g-E4, R320g-E4, R320g-M4 User's Guide
3. EXPRESSSCOPE Engine 3
73
Advertisement
Table of Contents
