Table of Contents
Advertisement
12
en | System overview
11
60-bay expansion unit - rear view
11
13
3.2
LED description
There are several LEDs on the front and rear of the chassis. The LEDs show the over-all status
of the system and the activity and health of specific components.
3.2.1
LEDs on the operator display panel
Each controller unit and expansion unit has LEDs located on the operator display panel. The
operator display panel is visible through the front bezel of a controller unit and through the
left end cap of an expansion unit.
2021.05 | V3 | DOC
5
Management port 1 (left) /
Management port 2 (right) - Dual
1 Gigabit Ethernet
Note: Use only Port 1 per controller
(default).
7
Serial port (micro USB)
9
Dual 12 Gb SAS drive expansion ports
Channel 5 (left) / Channel 6 (right) -
Host interface ports (Dual 10 GB
iSCSI, RJ45 Base‑T)
Note: Use only RJ45 Base‑T ports or
optical ports.
1
Mains connection 240 VAC
3
IOM A
5
IOM A - SAS port 2
7
IOM A - SAS port 4
9
On/off switch
IOM B - SAS port 1
IOM B - SAS port 3
6
8
10
12
1
2
3
4
5
6
8
9
10
11
12
13
2
4
6
8
10
12
14
Installation manual
DSA E-Series (E2800 60-bay)
Serial port (RJ45)
USB port (only for factory use)
Status display
Controller B (see Controller A)
7
14
On/off switch
IOM A - SAS port 1
IOM A - SAS port 3
Mains connection 100 - 240 VAC
IOM B
IOM B - SAS port 2
IOM B - SAS port 4
Bosch Security Systems B.V.
Advertisement
Table of Contents
