Table of Contents
Advertisement
DSA E-Series (E2800 60-bay)
10. Drag the Target x folder from the left side (Source) to the right side (VRM System), then
11. In the device tree, below the storage system, click Target x.
12. In the LUNs pane, click Select All, then click Set. The LUNs appear with the status Task
13. Click Yes to confirm. The status of the LUNs changes to Ready. The LUNs are formatted.
Bosch Security Systems B.V.
click OK.
In the LUNs pane to the right, all assigned LUNs appear with the status Unformatted.
format and a warning message box appears that informs you that formatting a disk will
delete all data.
Installation manual
Configuring the storage system | en
2021.05 | V3 | DOC
35
Advertisement
Table of Contents
