Bosch E2800 Installation Manual page 25

DSA E-Series (E2800 60-bay)
5.
6.
7.
Bosch Security Systems B.V.
Caution: An empty unit weighs approximately 60 kg (132 lbs). Four persons are required
to safely move an empty unit. A fully loaded unit weighs approximately 113 kg (250 lbs). A
mechanical lift is required to safely move the unit.
Carefully slide the unit all the way onto the rails.
Note: If applicable, you might need to remove the end caps or the system bezel to secure
the unit to the rack post. Replace the system bezel when you are done.
Note: Do not place additional equipment on the rails after you finish installing the unit.
The rails are not designed to bear additional weight.
For both front rail posts: Secure the unit to the front of the rack or system cabinet and
rails by inserting the screws through the holes of the unit, the holes of the mounting
brackets, the holes on the rack or system cabinet, and the holes on the front of rails.
M4x15
If applicable, replace the end caps or the system bezel.
Installation manual
Installation | en 25
2021.05 | V3 | DOC