Table of Contents
Advertisement
Tumble dryer supervisor level
Programme pack-
ages
Favourite pro-
grammes
Special pro-
grammes
120
External prog. selection
-
A communication module can be used to select the programme
from an external terminal.
This allows you to specify the scope of the tumble dryer programme.
You can select all of the programmes or individual programmes from
the relevant programme packages.
The tumble dryer's additional scope of programmes can be con-
figured. The programmes are listed under "Programme chart".
After switching on, you can also select a programme via: Favour-
ites.
12 programmes can be stored as favourites based on your own pri-
orities and requirements.
These favourites will also be made available in the control options
- Launderette ext. (12 prog)
- Launderette, basic (4 prog) (the first 4 of the 12 favourites).
You can specify the control option under
Tip: You can assign a different colour to each programme. In this
case, the Prog. colour allocation setting must be set to On.
Changing Favourite programmes
Select the programme you wish to change or replace.
Confirm the programme or the setting to be changed.
Another menu opens, enabling you to select a new programme or
change the parameters.
Save
Confirm with the
Your selection is now active.
You can put together 5 special residual moisture or time-controlled
programmes and assign your own programme names.
First, enter the programme name.
Select the special programme you want to change.
Save as
The
menu opens.
Use the letters and symbols below the line to enter the name.
Save
Touch the
sensor control.
You can now enter the parameters for a Res. moisture programme or
Timed drying.
The 5 special programmes are pre-programmed at the factory. You
can change these special programmes.
Controls
sensor control.
.
Advertisement
Table of Contents
