QUICK START GUIDE
Specifications and Application
•
Specifications and ordering information are in the Slimline Power System Brochure available at
abbpowerconversion.com
•
External Surge Protective Devices (SPDs) - are required on all AC inputs.
Equipment Safety is Approved in IEC 60664-1 Installation Category II environments.
•
Equipment and subassembly ports:
1. are suitable for connection to intra-building or unexposed wiring or cabling;
2. can be connected to shielded intra-building cabling grounded at both ends.
•
Grounding / Bonding Network – Connect to an Isolated Ground Plane (Isolated Bonding Network) or an Integrated
Ground Plane (Mesh-Bonding Network or Common Bonding Network).
•
Installation Environment - Install in Network Telecommunication Facilities, OSP, or where NEC applies.
•
Battery return may be either Isolated DC return (DC-I) or Common DC return (DC-C).
Reference Documents
These documents are available at
Document Title:
850035894 Galaxy Pulsar Edge Quick Start Guide
CC848836981 Pulsar Edge Controller Family Product Manual
Temperature:
North America – 50°C Max. with no derating. 2% / °C derating above 50°C to 75°C.
CE – 50°C Max.
Page 6
© 2023 ABB. All rights reserved.
abbpowerconversion.com
SPS -48V Shelf_QSG
Rev. 2.0