Table of Contents
Advertisement
(a) Construction of BNC connector and coaxial cable.
Parts of the BNC connector
Nut
Plug shell
Clamp
(b) Connecting the BNC connector with the coaxial cable.
15mm
(0.59inch)
Remove the outer sheath.
Clamp
Internal conductive
material
3mm
(0.12inch)
6mm
(0.24inch)
Soldering
Washer
Gasket
Contact
Nut
Washer
Gasket
Insulating material
Clamp and
outer conductor
Construction of coaxial cable
Outer sheath
Outer conductor
Insulating material
Internal conductive material
1) Remove the outer sheath of the
coaxial cable in the specified
dimension as shown left.
2) Slip a nut, a washer, a gasket, and a
clamp through the coaxial cable as
shown left, and loosen the outer
conductor.
3) Cut off the insulating material and
internal conductive material in the
specified dimensions as shown left.
Cut off the outer conductor in the
same dimension as the taper part of
the clamp, and extend it over the
clamp.
4) Solder the contact to the tip of the
internal conductive material.
5) Insert the contact assembly of 4) into
the plug shell, and engage the plug
shell with the nut.
8
Advertisement
Table of Contents
