Time; Date; Volume; Visibility Parameters - Miele PWM 509 Operating And Installation Instructions

Supervisor level

Time

Date

Volume

Visibility paramet-
ers

Sorting Extras

Appliance off
status
64
After selecting the clock format, you can set the time of day.
Clock format
- 24 h clock
- 12 h clock
- No clock
Set
- The time can be set.
The date can be set after selecting the date format.
Date format
- DD.MM.YYYY
- YYYY.MM.DD
- MM.DD.YYYY
Date
- The date can be set.
The volume for various sounds can be changed.
- Finish tone
- Keypad tone
- Welcome tone
It can be set to one of 7 different levels or switched off altogether.
- Fault tone
The fault tone can be activated or deactivated.
Various parameters, such as the temperature, spin speed, Extras,
etc., are displayed when a programme is selected. You can decide
which parameters should not be displayed. These parameters can
then not be edited during programme selection.
Factory default: all parameters are visible (marked in orange)

Visibility parameters

Under the setting
tom line. Touch the sensor control to change the sequence of Extras
(see "Arranging programmes" under "Supervisor level").
In order to save energy, the washing machine will switch off auto-
matically after the end of the programme or if no further selection is
made. You can change this setting.
Changing this setting leads to increased energy consumption.
- No switch off
- Switch off after 15 minutes (factory default)
Sort Extras
, appears in the bot-