Changing The Programme Sequence; Changing A Programme; Altering The Wash Programme; Cancelling A Programme - Miele PWM 509 Operating And Installation Instructions

Changing the programme sequence

Altering the wash
programme
60

Changing a programme

Before selecting a new programme, cancel the current programme
and select a new one.

Cancelling a programme

You can cancel a wash programme at any time after it has started.
Touch the Start/Stop sensor control.

The following will appear in the display:
 Cancel programme?
yes
Select .

The following will appear in the display:
Programme cancelled
The suds are not drained. If a new programme is selected, the suds
can continue to be used. If the programme is cancelled, the Drain or
Spin programme can be selected to remove the suds.
Wait until the door unlocks.

Pull open the door.

Remove the laundry.

Switching on the washing machine after an interruption
to the power supply
If the washing machine is switched off with the  button during a
wash programme, the programme will be interrupted.
Switch the washing machine back on with the  button.

Note the message in the display.

Touch the Start/Stop sensor.

The programme will also be interrupted if power is interrupted by a
power cut.
When power is resumed, confirm the message in the display with

OK.
Touch the Start/Stop sensor.

The programme continues.
.