Switching To Hot Water Operation; Hot Water Connection - Miele PWM 509 Operating And Installation Instructions

Switching to hot
water operation
Hot water con-
nection
For functional and technical reasons, it is not possible to connect
the machine exclusively to a hot water supply (without a cold water
connection).
Even if a hot water connection is present, the washing machine
must be connected to a cold water intake.
If the washing machine is due to be connected to a hot water point,
you can configure the settings Main wash water, Pre-wash water and
hot
Rinse water to (see "Supervisor level").
Unscrew the stopper from the hot water valve.

Screw on the hot water hose.

The machine can be connected to a hot water connection (max.
70 °C). To do this, the washing machine has to be reprogrammed by
the Miele Customer Service Department or your Miele dealer.
A separate water inlet hose is required for the hot water connection.
Installation
55