Readjusting Foot Levels; Adjusting The Movable Toe Kick - Blomberg DW 55502 FBI Installation Manual

1 /
(3,5mm)
Ø 8 "
A
B
C

7.3 READJUSTING FOOT LEVELS

Now that the dishwasher is in the cabinet
you must readjust the feet to bring the
dishwasher up to the required height and
attach it underneath the countertop.
1. Readjust the front foot levels with adjusting
wrench to balance the dishwasher and raise
it up under the countertop, make sure the
unit is level.
2. Readjust the rear foot levels with a
screwdriver to balance the dishwasher and
raise it to the required height using the
brackets supplied.
3. Attach the dishwasher underneath the
countertop with the four screws supplied
(Ø 1 / 8 " x 1 / 8 " - Ø 3.5mm x 14mm). Make
sure you do not go through the top of the
countertop or damage granite.
• For model, DW 55100 FBI, note that
1 /
(3,5mm)
Ø 8 "

7.4 ADJUSTING THE MOVABLE TOE KICK

Now that you have successfully installed the dishwasher, you
need to attach the toe kick to the dishwasher. The two piece
toe kick can be adjusted to the height and depth needed for
your kitchen. Be sure to use the slotted toe kick in the front
and the other behind it. They slide into each other.
1. Insert the movable toe kick brackets into the channel (A).
2. Make sure that the plastic tab to the left of the "L" opening
on the dishwasher has not closed the channel you will push
the bracket through.
Notice :
Be sure to notice there is a left and a right bracket.
Adjust the toe kick brackets forward or backwards so that they
will align with the kitchen toe kick (B).
14
USA
Notice :
you should keep the total height of the
dishwasher at 32 " (819mm) max.
1/4