Zanussi ZPAC9002 Manual page 19

USING YOUR AIR CONDITIONER
Programming shut down:
- When the appliance is running press the TIMER button, the screen
will then display the hours and several symbols will flash together
(Fig. 5).
- Adjust the timer until the desired time is displayed. Wait for
approximately 5 seconds and then the timer will be active. Only the
TIMER symbol should be displayed on the screen (Fig. 6).
- Press either the TIMER or the ON/OFF button and the timer will be
cancelled. The TIMER symbol will then disappear from the screen
(Fig. 7).
Tips for correct use
To get the best out of your appliance, follow these
recommendations:
• If possible, close the windows and doors in the room you want to
be air conditioned (Fig 21). When installing the appliance semi-
permanently you should leave a door slightly open (as little as 1cm)
to guarantee correct ventilation.
• Protect the room from direct exposure to the sun by partially
closing curtains and/or blinds to make the appliance much more
economical to run (Fig 22).
• Never rest objects of any kind on the appliance.
• Do not obstruct the air intake and outlet (Fig 23). Ensure the grills
are left free.
• Make sure there are no heat sources within the room.
Page 19