Zanussi ZPAC9002 Manual page 18

USING YOUR AIR CONDITIONER
When in HEAT mode, the selected temperature will increase by 1°C
(1°F) per hour over a 3-hour period. This new temperature will then
be maintained for the next 5 hours. After 5 hours the appliance will
turn itself off.
This function can be cancelled at any time during operation by
pressing either the NIGHT MODE, MODE or FAN SPEED button.
Switching the unit of temperature
When the appliance is in standby, press the UNIT SWITCH button and
this will allow you to change the unit of temperature from °C to °F
and vice versa.
Setting the timer
The timer can be used to schedule the start up or shutting down of
the appliance.
Programming start up:
- Turn on the appliance and select the mode, temperature and fan
speed you desire, then turn off the appliance.
- Press the TIMER button and the screen will display 1-24 hours
while the COOL, FAN SPEED and TIMER symbol all flash together
(Fig. 3).
- Adjust the timer until the desired time is displayed. Wait for
approximately 5 seconds and then the timer will then be active.
Only the TIMER symbol should be displayed on the screen (Fig. 4).
- Press either the TIMER or the ON/OFF button and the timer will be
cancelled. The TIMER symbol will then disappear from the screen.
Page 18