Table of Contents
Advertisement
en Troubleshooting
Fault
Removable streaks
are present on
glasses, glassware
with a metallic appear-
ance and cutlery.
Irreversible clouding
of glassware.
Rust spots on cutlery. Cutlery is not sufficiently rust-resistant. Knife blades
60
Cause and troubleshooting
Amount of rinse aid to be dispensed is set too high.
Set the rinse aid system to a lower setting.
▶
→ "Setting the amount of rinse aid", Page 33
No rinse aid has been added.
Add rinse aid.
▶
→ "Adding rinse aid", Page 33
Detergent residue is present in the final rinse. Lid of
the detergent dispenser is blocked by tableware items
and will not open fully.
Arrange tableware in the top basket tableware so
1.
the tab collecting tray is not obstructed by table-
ware.
→ "Arrange tableware", Page 37
Items of tableware are blocking the dispenser lid.
Do not place tableware or fragrance dispensers in
2.
the tablet collecting tray.
Tableware has been precleaned too intensely. The
sensors chose a weaker programme. Stubborn soiling
cannot be entirely removed.
Only remove large remnants of food and do not
▶
prerinse tableware.
Adjust the sensitivity of the sensors.
▶
→ "Sensors", Page 12
Glasses are not dishwasher-proof, only suitable for
dishwashers.
Use dishwasher-proof glasses.
▶
Glasses are usually only suitable for use in a dish-
washer, i.e. long-term wear or long-term changes
must be expected.
Avoid a lengthy steam phase (standing time after
▶
wash cycle ends).
Use a programme with a lower temperature.
▶
→ "Programmes", Page 19
Set the softening system to the water hardness.
▶
→ "Setting the water softening system", Page 31
Use detergent with a glass protection component.
▶
are often more severely affected.
Use rust-resistant tableware.
▶
Cutlery may also rust if washed together with rusting
items.
Advertisement
Table of Contents
