Table of Contents
Advertisement
en Basic settings
Basic setting
Water connection
Eco forecast
Emotion Light
Status Light
Start programme
Tone volume
Button volume
Child-proof lock
WLAN
1
Factory setting (may vary according to model)
42
Selection
1
Cold water
Hot water
on
1
off
off
On via main
1
switch
On on opening
door
1
on
off
1
Eco
Prog. last selected
Scale with multiple
levels.
Scale with multiple
levels
on
1
off
on
off
Description
Set cold water or hot water connec-
tion.
Only set the appliance to hot water if
this can be prepared with little energy
and a suitable installation is available,
e.g. solar heating system with circula-
tion line. The water temperature
should be at least 40 °C and max.
60 °C.
Switch EcoCheck on or off.
When selecting the programme, the
average water consumption and en-
ergy consumption is briefly shown on
the display.
Switch the interior lighting of the appli-
ance on or off.
When the appliance door is opened,
the interior lighting switches off auto-
matically after 10 minutes.
Switch "Status Light" on or off.
While the programme is running, a
strip of light appears on the left-hand
side of the appliance. If the appliance
door is not completely closed, the
strip of light will flash. The programme
has ended when the strip of light is no
longer visible on the left-hand side.
Set a default programme for when the
appliance is switched on.
Set the signal volume at the end of
the programme.
Level 0 switches the signal tones off.
Set the button volume during opera-
tion.
Level 0 switches the button tones off.
Switch the Electric childproof lock
→ Page 11 on or off.
Switch the wireless network connec-
tion on or off.
The basic setting "WLAN" is only avail-
able once the appliance is connected
to the Home Connect app.
→ "Home Connect ", Page 43
Advertisement
Table of Contents
