Table of Contents
Advertisement
en Troubleshooting
Fault
A different error code
appears in the display
window.
E:0100 to E:9010
Tableware is not dry.
54
Cause and troubleshooting
A technical fault is present.
Press
.
1.
Unplug the appliance or switch off the fuse.
2.
Wait at least 2 minutes.
3.
Insert the mains plug of the appliance in a socket
4.
or switch on the fuse.
Switch the appliance on.
5.
If the problem occurs again:
6.
Press
.
‒
Turn off the water tap.
‒
Pull out the mains plug.
‒
Contact Customer Service → Page 66 and give
‒
the error code.
No rinse aid used or dosage set too low.
Add Rinse aid → Page 33.
1.
Set the amount of rinse aid to be dispensed.
2.
→ "Setting the amount of rinse aid", Page 33
Programme or programme option has no drying
phase, or the drying phase is too brief.
Select a programme with drying, e.g. intensive,
▶
strong or ECO programme.
Some option buttons decrease the drying result, e.g
varioSpeed.
Water collects in recesses of the tableware or cutlery.
Position tableware at an angle where possible.
▶
The combined detergent used has a poor drying per-
formance.
Use rinse aid to improve drying performance.
1.
Use a different combined detergent with a better
2.
drying performance.
Extra Dry not activated to improve drying perform-
ance.
Advertisement
Table of Contents
