Related Manuals for ABB Safeball JSTD1
Summary of Contents for ABB Safeball JSTD1
- Page 1 Original instructions Safeball JSTD1 One/two hand enabling device ABB Jokab Safety Varlabergsvägen 11, SE-434 39 Kungsbacka, Sweden www.abb.com/jokabsafety...
- Page 2 DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY. In no event shall responsibility of ABB JOKAB SAFETY for any act exceed the individual price of the product on which liability asserted.
-
Page 3: Table Of Contents
Operation ............................11 One hand device ..............................11 Two hand device ..............................11 Limitations ................................11 Model overview ..........................12 Accessories ................................12 Technical data ..........................13 Dimensions ................................14 EC Declaration of conformity ....................... 15 2TLC172182M0201, rev. F www.abb.com/jokabsafety 2015-12-04... -
Page 4: Introduction
This document is intended for authorized installation personnel. Prerequisites It is assumed that the reader of this document has knowledge of the following: Basic knowledge of ABB Jokab Safety products. Knowledge of two hand enabling devices. Knowledge of machine safety. -
Page 5: Overview
Safeball is a one hand device which can also be used in pair to create a two hand device. They can be mounted on a table or on aluminium profiles available from ABB Jokab Safety. In order to increase the grip and ergonomics, the Safeballs can be mounted on a flexible support or similar device. -
Page 6: Connections
When used as a two-hand device, Safeball is designed for operation together with the safety relay JSBR4 from ABB Jokab Safety. This connection can achieve the highest safety level according to EN 574. To achieve the highest safety level for a two-hand device, dual supervised safety function and simultaneous actuation of the two Safeballs within 0.5 seconds is required (PL e according to EN ISO 13849-1). -
Page 7: Connection Examples
Connection example – JSTD1-A, -B or -C connected in a one-hand or two-hand device setup JSTD1-A, -B, -C JSTD1-A, -B, -C JSTD1-A, -B, -C 24 VDC Type: JSBR4 24 VDC Type: RT9 One-hand device Two-hand device 2TLC172182M0201, rev. F www.abb.com/jokabsafety 2015-12-04... -
Page 8: Installation And Maintenance
It is also possible to mount the Safeball either in a fixed position or on a flexible mount such as a ball joint, allowing tilt and rotation for increased ergonomic support. Refer to the section Accessories below or the product list at www.abb.com/jokabsafety for details. Installation precautions Warning! Safeball must be installed with a minimum distance S to the dangerous machine movement. -
Page 9: Minimum Mounting Distances And Requirements For Two Hand Device
0.5 seconds. Safeball #1 1oo2 monitor with time limit 0.5 s 1oo2 monitor with time limit 0.5 s Safeball #2 1oo2 monitor with time limit 0.5 s Two hand device function description 2TLC172182M0201, rev. F www.abb.com/jokabsafety 2015-12-04... -
Page 10: Maintenance
(EN 62061:2005). In case of breakdown or damage to the product, contact the nearest ABB Jokab Safety Service Office or reseller. Do not try to repair the product yourself since it may accidentally cause permanent damage to the product, impairing the safety of the device which in turn could lead to serious injury to personnel. -
Page 11: Operation
If it is required to protect other persons in the same risk area, either each person at risk should be equipped with a further two-hand control system (suitably interlocked), or complementary protection should be provided, e.g. a light curtain. 2TLC172182M0201, rev. F www.abb.com/jokabsafety 2015-12-04... -
Page 12: Model Overview
Floor stand including spacer ring. Ball & socket table mount for Safeball. Article number: Article number: 2TLA020007R4100 2TLA020007R0900 A wide variety of mounts and other accessories are available; please refer to the product list at www.abb.com/jokabsafety. 2TLC172182M0201, rev. F www.abb.com/jokabsafety 2015-12-04... -
Page 13: Technical Data
Good Silicon oil Good Acetone Good Please contact ABB Jokab Safety for more information regarding other substances. Information for use in USA / Canada Surrounding air temperature maximum 40°C Type 1 The device should be mounted on an ultimate enclosure. -
Page 14: Dimensions
Appropriate for the design of two hand device type IIIC Certificates Inspecta, cULus The Jokab Safety branded product with article number beginning with 2TLJ is fully compatible with the ABB branded product with article number beginning with 2TLA. Dimensions Safeball dimensions NB: All measurements in millimetres 2TLC172182M0201, rev. -
Page 15: Ec Declaration Of Conformity
EC Declaration of conformity 2TLC172182M0201, rev. F www.abb.com/jokabsafety 2015-12-04...