Opening The Chassis Door - Huawei ACBox2000-21-D0-A-US User Manual

ACBox2000-21-D0-A-US
User Manual (U.S. Edition)

5.3 Opening the Chassis Door

Prerequisites
Before opening the chassis door, ensure that the handle of the isolation switch is in the OFF
position; otherwise, the chassis door cannot be opened.
Procedure
Step 1 Remove the two screws from the chassis door using a hex key and set them aside.
Figure 5-1 Removing screws
Step 2 Open the chassis door and install a door rod.
Issue 01 (2016-12-15)
 Both the AC input and output power cables support 3W and 3W+PE connection modes.
 Outdoor copper-core cables that can withstand at least 90° C (194° F) are recommended. To facilitate
the installation, use flexible cables.
 For cable protection purposes, you are advised to route cables through pipes before connecting
cables.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
23