Huawei Quidway S5000 Series Operation Manual - Getting Started

Hide thumbs Also See for Quidway S5000 Series:

Advertisement

Operation Manual - Getting Started
Quidway S5000 Series Ethernet Switches
Chapter 1 Product Overview ........................................................................................................
1.1 Product Overview...............................................................................................................
1.2 Function Features ..............................................................................................................
Chapter 2 Logging in Ethernet Switch ........................................................................................
2.1 Set up Configuration Environment via the Console Port ...................................................
2.2 Set up Configuration Environment through Telnet ............................................................
2.2.1 Connect PC to Ethernet Switch through Telnet ......................................................
2.2.2 Telnet Ethernet Switch through Ethernet Switch ....................................................
Chapter 3 Command Line Interface.............................................................................................
3.1 Command Line Interface ...................................................................................................
3.2 Command Line View..........................................................................................................
3.3 Feature and Functions of Command Line .........................................................................
3.3.1 Online Help of Command Line ................................................................................
3.3.2 Displaying Characteristics of Command Line .........................................................
3.3.3 History Command of Command Line ......................................................................
3.3.4 Common Command Line Error Messages..............................................................
3.3.5 Editing Characteristics of Command Line...............................................................
Chapter 4 User Interface Configuration ......................................................................................
4.1 User Interface Overview ....................................................................................................
4.2 User Interface Configuration..............................................................................................
4.2.1 Enter User Interface View .......................................................................................
4.2.2 Configure the User Interface-supported Protocol ...................................................
4.2.3 Configure the Attributes of AUX (Console) Port......................................................
4.2.4 Configure the Terminal Attributes ...........................................................................
4.2.5 Manage Users .........................................................................................................
4.2.6 Configure Redirection .............................................................................................
4.3 Display and Debug User Interface...................................................................................
Chapter 5 System IP Configuration .............................................................................................
5.1 System IP Overview ..........................................................................................................
5.1.1 Management VLAN.................................................................................................
5.1.2 IP Address...............................................................................................................
5.1.3 Static Route.............................................................................................................
5.2 System IP Configuration ....................................................................................................
5.2.1 Create/Delete a Management VLAN Interface .......................................................

Table of Contents

i
Table of Contents
1-1
1-1
1-2
2-1
2-1
2-3
2-3
2-5
2-6
3-1
3-1
3-1
3-4
3-4
3-6
3-6
3-7
3-7
4-1
4-1
4-2
4-2
4-2
4-3
4-4
4-6
4-9
4-10
5-1
5-1
5-1
5-1
5-4
5-4
5-4
5-4

Advertisement

Table of Contents
loading

Summary of Contents for Huawei Quidway S5000 Series

  • Page 1: Table Of Contents

    Operation Manual - Getting Started Quidway S5000 Series Ethernet Switches Table of Contents Table of Contents Chapter 1 Product Overview ......................1.1 Product Overview....................... 1.2 Function Features ......................Chapter 2 Logging in Ethernet Switch ..................2.1 Set up Configuration Environment via the Console Port ...........
  • Page 2 Operation Manual - Getting Started Quidway S5000 Series Ethernet Switches Table of Contents 5.2.3 Set/Delete Management VLAN Interface Description Character String ....5.2.4 Enable/Disable Management VLAN Interface ............5.2.5 Configure Hostname and Host IP Address ............. 5.2.6 Configure a Static Route ..................
  • Page 3: Chapter 1 Product Overview

    Ethernet gains much attention on the market for its low cost, high speed and ease of use. Accordingly, Huawei Technologies Co. Ltd. (hereafter referred to as Huawei) launches the Quidway Series Ethernet Switches to meet the fast growing demand for broadband network development.
  • Page 4: Function Features

    Quidway S5000 Series Ethernet Switches support the following services: Internet broadband access Enterprise and campus networking Provide multicast service function and support audio and video multicast services. Hereinafter Quidway S5000 Series Ethernet Switches are referred to as S5000 Series Ethernet Switches. 1.2 Function Features Table 1-1 Function features...
  • Page 5: Chapter 2 Logging In Ethernet Switch

    Operation Manual - Getting Started Quidway S5000 Series Ethernet Switches Chapter 2 Logging in Ethernet Switch Chapter 2 Logging in Ethernet Switch 2.1 Set up Configuration Environment via the Console Port Step 1: As shown in the figure below, to set up the local configuration environment, connect the serial port of a PC (or a terminal) to the Console port of the Ethernet switch with the Console cable.
  • Page 6 Operation Manual - Getting Started Quidway S5000 Series Ethernet Switches Chapter 2 Logging in Ethernet Switch Figure 2-3 Configure the port for connection Figure 2-4 Set communication parameters Step 3: The Ethernet switch is powered on. Display self-test information of the Ethernet switch and prompt you to press Enter to show the command line prompt such as <Quidway>.
  • Page 7: Set Up Configuration Environment Through Telnet

    Operation Manual - Getting Started Quidway S5000 Series Ethernet Switches Chapter 2 Logging in Ethernet Switch Step 4: Input a command to configure the Ethernet switch or view the operation state. Input a “?” for an immediate help. For details of specific commands, refer to the following chapters.
  • Page 8 Operation Manual - Getting Started Quidway S5000 Series Ethernet Switches Chapter 2 Logging in Ethernet Switch Workstation Workstation Ethernet port Ethernet port Ethernet Ethernet Serv er Serv er Workstation Workstation PC ( for configuri n g the switch PC ( for configuri n g the switch...
  • Page 9: Telnet Ethernet Switch Through Ethernet Switch

    Operation Manual - Getting Started Quidway S5000 Series Ethernet Switches Chapter 2 Logging in Ethernet Switch 2.2.2 Telnet Ethernet Switch through Ethernet Switch After a user has logged into a switch, he or she can configure another switch through the switch via Telnet. The local switch serves as Telnet client and the peer switch serves as Telnet server.
  • Page 10: Set Up Configuration Environment Through A Dial-Up The Modem

    Operation Manual - Getting Started Quidway S5000 Series Ethernet Switches Chapter 2 Logging in Ethernet Switch Step 4: Enter the preset login password and you will see the prompt such <Quidway>. If the prompt “Too many users!” appears, it indicates that too many users are connected to the Ethernet through the Telnet at this moment.
  • Page 11 Operation Manual - Getting Started Quidway S5000 Series Ethernet Switches Chapter 2 Logging in Ethernet Switch Note: 1) The Modem configuration commands and outputs may be different according to different Modems. For details, refer to the User Manual of the Modem.
  • Page 12 Operation Manual - Getting Started Quidway S5000 Series Ethernet Switches Chapter 2 Logging in Ethernet Switch Figure 2-9 Set the dialed number Figure 2-10 Dial on the remote PC Step 5: Enter the preset login password on the remote terminal emulator and wait for the prompt such as <Quidway>.
  • Page 13: Chapter 3 Command Line Interface

    Operation Manual - Getting Started Quidway S5000 Series Ethernet Switches Chapter 3 Command Line Interface Chapter 3 Command Line Interface 3.1 Command Line Interface Quidway series Ethernet Switches provide a series of configuration commands and command line interfaces for configuring and managing the Ethernet switch. The command line interface has the following characteristics: Local configuration via the Console port.
  • Page 14 Operation Manual - Getting Started Quidway S5000 Series Ethernet Switches Chapter 3 Command Line Interface Configuration level: Service configuration commands, including routing command and commands on each network layer, are used to provide direct network service to the user. Management level: They are commands that influence basis operation of the system and system support module, which plays a support role on service.
  • Page 15 Operation Manual - Getting Started Quidway S5000 Series Ethernet Switches Chapter 3 Command Line Interface Layer-2 ACL view RADIUS server group view ISP domain view The relation diagram of the views as follows. Ethernet port view Ethernet port view User interface view...
  • Page 16: Feature And Functions Of Command Line

    Operation Manual - Getting Started Quidway S5000 Series Ethernet Switches Chapter 3 Command Line Interface Command Command to Function Prompt Command to enter view exit quit or return System Configure system Key in system-view in [Quidway] returns view parameters user view...
  • Page 17 Operation Manual - Getting Started Quidway S5000 Series Ethernet Switches Chapter 3 Command Line Interface Partial help You can get the help information through these online help commands, which are described as follows. Input “?” in any view to get all the commands in it and corresponding descriptions.
  • Page 18: Displaying Characteristics Of Command Line

    Operation Manual - Getting Started Quidway S5000 Series Ethernet Switches Chapter 3 Command Line Interface To switch to the Chinese display for the above information, perform the language-mode command. 3.3.2 Displaying Characteristics of Command Line Command line interface provides the following display characteristics: For users’...
  • Page 19: Common Command Line Error Messages

    Operation Manual - Getting Started Quidway S5000 Series Ethernet Switches Chapter 3 Command Line Interface 3.3.4 Common Command Line Error Messages All the input commands by users can be correctly executed, if they have passed the grammar check. Otherwise, error messages will be reported to users. The common error messages are listed in the following table.
  • Page 20: Chapter 4 User Interface Configuration

    Operation Manual - Getting Started Quidway S5000 Series Ethernet Switches Chapter 4 User Interface Configuration Chapter 4 User Interface Configuration 4.1 User Interface Overview User interface configuration is another way provided by the Ethernet switch to configure and manage the port data.
  • Page 21: User Interface Configuration

    Operation Manual - Getting Started Quidway S5000 Series Ethernet Switches Chapter 4 User Interface Configuration Number of VTY: The first VTY interface is designated as VTY 0, the second one is designated as VTY 1, and so on. 4.2 User Interface Configuration...
  • Page 22: Configure The Attributes Of Aux (Console) Port

    Operation Manual - Getting Started Quidway S5000 Series Ethernet Switches Chapter 4 User Interface Configuration Caution: 1) If Telnet protocol is specified, to ensure a successful login via the Telnet, you must configure the password by default. 2) If SSH protocol is specified, to ensure a successful login, you must configure the local or remote authentication of username and password using the authentication-mode scheme command.
  • Page 23: Configure The Terminal Attributes

    Operation Manual - Getting Started Quidway S5000 Series Ethernet Switches Chapter 4 User Interface Configuration III. Configure parity on the AUX (Console) port Table 4-5 Configure parity on the AUX (Console) port Operation Command Configure parity mode on the AUX (Console) port...
  • Page 24 Operation Manual - Getting Started Quidway S5000 Series Ethernet Switches Chapter 4 User Interface Configuration such user logs out, he cannot log in again. In this case, a user can log in to the switch through the user interface only when the terminal service is enabled again.
  • Page 25: Manage Users

    Operation Manual - Getting Started Quidway S5000 Series Ethernet Switches Chapter 4 User Interface Configuration IV. Set the screen length If a command displays more than one screen of information, you can use the following command to set how many lines to be displayed in a screen, so that the information can be separated in different screens and you can view it more conveniently.
  • Page 26 In the following example, local username and password authentication are configured. # Perform username and password authentication when a user logs in through VTY 0 user interface and set the username and password to zbr and huawei respectively. [Quidway-ui-vty0] authentication-mode scheme...
  • Page 27 Operation Manual - Getting Started Quidway S5000 Series Ethernet Switches Chapter 4 User Interface Configuration Note: By default, the password is required for authenticating the Modem and Telnet users when they log in. If the password has not been set, when a user logs in, he will see the prompt “password required, but none set.”.
  • Page 28: Configure Redirection

    Operation Manual - Getting Started Quidway S5000 Series Ethernet Switches Chapter 4 User Interface Configuration Note: When a user logs in the switch, the command level that it can access depends on two points. One is the command level that the user itself can access, the other is the set command level of this user interface. If the two levels are different, the former will be taken.
  • Page 29: Display And Debug User Interface

    Operation Manual - Getting Started Quidway S5000 Series Ethernet Switches Chapter 4 User Interface Configuration II. auto-execute command The following command is used to automatically run a command after you log in. After a command is configured to be run automatically, it will be automatically executed when you log in again.
  • Page 30: Chapter 5 System Ip Configuration

    Operation Manual - Getting Started Quidway S5000 Series Ethernet Switches Chapter 5 System IP Configuration Chapter 5 System IP Configuration 5.1 System IP Overview 5.1.1 Management VLAN Before performing remote management such as Telnet and web management, the IP address of the switch has to be configured first. For the Quidway series Layer 2 Ethernet switch, only one VLAN interface can be configured with an IP address, and the VLAN that corresponds to this interface becomes the management VLAN.
  • Page 31 Operation Manual - Getting Started Quidway S5000 Series Ethernet Switches Chapter 5 System IP Configuration Where, Class A, Class B and Class C are unicast addresses, while Class D addresses are multicast ones and class E addresses are reserved for special applications in future.
  • Page 32 Operation Manual - Getting Started Quidway S5000 Series Ethernet Switches Chapter 5 System IP Configuration II. Subnet and mask As the Internet develops so fast, the IP address resource is exhausting. The traditional IP address assignment wastes too much. The concepts of address mask and subnet are raised to make good use of the IP address.
  • Page 33: Static Route

    Huawei Layer 2 Series Ethernet Switches can be configured with static route, used for login to the switch through the network.
  • Page 34: Set/Delete Management Vlan Interface Description Character String

    Restore the default description character string of management VLAN interface undo description string By default, the description character string is HUAWEI, Quidway Series, Vlan-interface1 Interface. Vlan-interface1 is the management VLAN interface name. 5.2.4 Enable/Disable Management VLAN Interface The following command can be used for disabling or enabling the management VLAN interface.
  • Page 35: Configure Hostname And Host Ip Address

    Operation Manual - Getting Started Quidway S5000 Series Ethernet Switches Chapter 5 System IP Configuration interface is disabled. When there is one or more Ethernet ports in up status, the management VLAN interface is also up, i.e. the management VLAN interface is enabled.
  • Page 36: Display And Debug System Ip

    Operation Manual - Getting Started Quidway S5000 Series Ethernet Switches Chapter 5 System IP Configuration Table 5-8 Configure the default preference of static routes Operation Command ip route-static default-preference Configure the default preference value of static routes default-preference-value Remove the default preference value of static routes configure undo ip route-static default-preference By default, its value is 60.

Table of Contents