Address 2 - Comp_Temp; Address 3 - Adc_Pres - GE DPS 5000 Series User Manual

Bit 15
Bit 14
Bit 7 Bit 6
Bit 31–0 COMP_PRES [31..0]: Read only – the most recently updated compensated
pressure value in the pressure units defined by the PRES_UNIT register
(address 84). Reading this register whilst the sensor is in the auto-update
mode will clear the CONV (bit 0) flag of the STATUS register (address 0).
0xn..n Number type float
3.3.4 Address 2 – COMP_TEMP
Bit 31 Bit 30
Bit 23 Bit 22
Bit 15 Bit 14
Bit 7
Bit 6
Bit 31–0 COMP_TEMP [31..0]: Read only – the most recently updated compensated
temperature value in °C. Reading this register whilst the sensor is in the auto-
update mode will clear the CONV (bit 0) flag of the STATUS register (address 0).
0xn..n Number type float
3.3.5 Address 3 – ADC_PRES
Bit 31 Bit 30
Bit 23 Bit 22
Bit 15
Bit 14
Bit 7
Bit 6
Bit 31–0 ADC_PRES [31..0]: Read only – the most recently updated pressure ADC value.
This value is used to calculate the value held in the MVOLT_PRES register
(address 6). Reading this register whilst the sensor is in the auto-update mode
will clear the CONV (bit 0) flag of the STATUS register (address 0).
0xn..n Number type unsigned word
8
Bit 13 Bit 12 Bit 11
COMP_PRES [15..8]
R-X
Bit 5 Bit 4 Bit 3
COMP_PRES [7..0]
R-X
Bit 29 Bit 28 Bit 27
COMP_TEMP [31..24]
R-X
Bit 21 Bit 20 Bit 19
COMP_TEMP [23..16]
R-X
Bit 13 Bit 12 Bit 11
COMP_TEMP [15..8]
R-X
Bit 5 Bit 4 Bit 3
COMP_TEMP [7..0]
R-X
Bit 29 Bit 28 Bit 27
ADC_PRES [31..24]
R-X
Bit 21 Bit 20 Bit 19
ADC_PRES [23..16]
R-X
Bit 13 Bit 12 Bit 11
ADC_PRES [15..8]
R-X
Bit 5 Bit 4 Bit 3
ADC_PRES [7..0]
R-X
May 2015
Bit 10 Bit 9 Bit 8
Bit 2 Bit 1 Bit 0
Bit 26 Bit 25 Bit 24
Bit 18 Bit 17 Bit 16
Bit 10 Bit 9 Bit 8
Bit 2 Bit 1 Bit 0
Bit 26 Bit 25 Bit 24
Bit 18 Bit 17 Bit 16
Bit 10 Bit 9 Bit 8
Bit 2 Bit 1 Bit 0
K0582 Revision B