Chapter 2 Preparations
<5> Connect two power cords that removed in
step <3> to connector on the control kit.
(The parts indicated by circle on the figure on
the right)
<6> Connect two power cords on control kit to the
connector on the motherboard you removed
at step <3>.
6.
Install the LED cable to the device tray you
removed at step 4.
<1> Attach the bracket part of the LED cable to
the right edge of the device tray.
<2> Fix with a flat-head screw.
7.
At the position marked in the figure, fix the LED
cable to device tray with a cable tie.
Express5800/T110j-S, T110j-S (2nd-Gen) User's Guide
1. Installing Internal Optional Devices
Flat-head screw
83