Installation For N8181-153 Internal Simple Ups Control Kit - NEC Express5800 Series User Manual
Hide thumbs
Also See for Express5800 Series:
- User manual (574 pages) ,
- Maintenance manual (238 pages) ,
- Installation manual (75 pages)
Table of Contents
Advertisement
Chapter 2 Preparations
Installation for N8181-153 Internal simple UPS Control Kit
Install N8181-153 Internal simple UPS Control Kit first before installing N8181-152 Internal simple UPS.
1.
See Chapter 2 (1.2 Overview of Installation and Removal) for preparations.
2.
To remove the side cover and the front bezel, see Chapter 2 (1.3 Removing the Side Cover and 1.4
Removing the Front Bezel).
3.
Check the components of N8181-153 Internal simple
UPS Control Kit
・Control kit
・Battery holder bracket
・LED cable
・Screws (Flat-head screw (2), Countersunk screw (2)).
・Cable tie
・Device tray
4.
Remove the blank cover. Push the tab on the tray
and pull out the device tray from the 3.5-inch
expansion bay.
Note
A battery holder bracket and a countersunk screw are used when installing N8181-
152 Internal simple UPS in next step.
Express5800/T110j-S, T110j-S (2nd-Gen) User's Guide
1. Installing Internal Optional Devices
1
2
81
Advertisement
Table of Contents
