Chapter 2 Preparations
5.
Mount the control kit in front of power unit, with the
following procedures.
<1> Insert the control kit under the 3.5-inch
expansion bay.
<2> Fix it with a countersunk screw and a flat-
head screw. (The parts indicated by circle on
the figure on the right)
<3> Remove two power cords on the
motherboard.
<4> Connect the I2C cable of the control kit to the
connector on the motherboard.
82
Express5800/T110j-S, T110j-S (2nd-Gen) User's Guide
1. Installing Internal Optional Devices
Flat-head screw
Countersunk screw