A3.11 Voice Mail Transfer Button Assignment - Panasonic KX-TVA200 User Manual

A3.11 Voice Mail Transfer Button Assignment

This feature allows an extension user to transfer calls directly to a mailbox. This is
available with both DPT and Inband Integration.
PC programming is also available for KX-TD500 and KX-TA824 users (see A3.12
Button Assignment via PC Programming).
1.
Enter PITS Programming:
a. While on-hook, press the PROGRAM button or set the MEMORY switch to
"PROGRAM".
b. Enter [99]. (This step is not needed for KX-TA624 and KX-TA824.) The display
changes to PT-PGM Mode.
2.
Press the desired Flexible (CO or DSS/BLF) button that you wish to assign as the
VTR button.
3.
Enter the programming number.
KX-TD: [8]
KX-TA1232: [8]
KX-TA: [94]
Screen output: VTR
4.
Dial the Voice Mail extension number.
Screen output: VTR- _ _ _
(_ _ _ = The extension number you entered).
5.
Press the STORE button.
6.
To exit the Personal Programming mode, press the PROGRAM button or set the
MEMORY switch to "SET".
7.
Repeat these steps for each telephone.
Conditions: This button must be a CO or DSS/BLF key to be
programmed as a VTR button. When all Voice Mail ports are
busy and this key is pressed followed by an extension
number, the user will hear either a dial tone or a busy tone,
depending on the Call Waiting on VM Group setting on the
PBX.
Subscriber's Manual
139