A3.9 Two-Way Recording Button Assignment - Panasonic KX-TVA200 User Manual

A3.9 Two-way Recording Button Assignment
For the Two-way Recording feature to work at an extension, the extension must have
a TWR button on it. This key must either be a DSS/BLF or CO key with a lamp. Follow
the procedure below to assign a TWR button on an extension. (This item should be
programmed by each extension user through Personal Programming.)
PC programming is also available for KX-TD500 and KX-TA824 users (see A3.12
Button Assignment via PC Programming).
1.
Enter PITS Programming:
a. While on-hook, press the PROGRAM button or set the MEMORY switch to
"PROGRAM".
b. Enter [99]. (This step is not needed for KX-TA624 and KX-TA824.) The display
changes to PT-PGM Mode.
2.
Press the Flexible button (CO or DSS/BLF) that you want to assign as the TWR
button.
3.
Enter: [90].
Screen output: 2Way-Rec:
4.
Dial the Voice Mail extension number.
Screen output: 2Way-Rec: _ _ _
(_ _ _ = The extension number you entered).
5.
Press Store.
6.
To exit the Personal Programming mode, press the PROGRAM button or set the
MEMORY switch to "SET".
7.
Repeat these steps for each telephone.
Conditions: This button must be a CO or DSS/BLF key to be
programmed as a TWR button. If this key is pressed when
all Voice Mail ports are busy, the user will hear a reorder
tone.
Subscriber's Manual
137