A2.11 Voice Mail Transfer (Vtr) Button Assignment - Panasonic KX-TVA200 User Manual

Subscriber's Manual

A2.11 Voice Mail Transfer (VTR) Button Assignment

For the Voice Mail Transfer feature to work at an extension, the extension must have
the VTR button. This button must either be a DSS/BLF or CO button with a lamp.
Follow the procedure below to assign a VTR button on an extension. (This is station
level programming and should be done at each individual telephone.) PC programming
is also available (see A2.12 Button Assignment via PC Programming).
1.
Enter Personal Programming:
While on-hook, press the PROGRAM button.
(Display changes to PT-PGM Mode.)
2.
Press the desired Flexible (CO or DSS/BLF) button that you want to assign as the
VTR button.
3.
Press [94].
Screen output: VTR-
4.
Enter a Voice Mail floating extension number.
Screen output: VTR- _ _ _
(_ _ _ = The Voice Mail floating extension number you entered).
5.
Press the STORE button.
6.
Press the PROGRAM button or lift the handset to exit the Personal Programming
mode.
7.
Repeat these steps for each telephone.
Conditions:
118
This button must be a flexible (CO or DSS/BLF) button to be
programmed as a VTR button. When all Voice Mail ports are
busy and this key is pressed followed by an extension
number, the user will hear either a dial tone or a busy tone,
depending on the Call Waiting on VM Group setting on the
PBX.