Cleaning Work - Beko QWIK-PURE 10 Installation And Operation Manual

QWIK-PURE ®

9.3.3.2 Cleaning work

For cleaning work to be carried out, the following prerequisites must be fulfilled and the respective
preparatory tasks must have been completed.
Tools
• No tools necessary
1. The QWIK‑PURE
2.
The assembly unit to be cleaned has been dismantled.
3.
Bring the assembly unit to be cleaned to a washing station with an integrated oil separator.
Illustration
1. Transport the cleaned and dried assembly unit to the place of installation of the QWIK‑PURE
and mount it.
2. Put the QWIK‑PURE
48 | 64
Prerequisites
Material
• Warm water
• Cotton or disposable cloth
Preparatory tasks
has been decommissioned.
®
Concluding work
back into operation (see section "7. Commissioning" on page 34).
®
Installation and operation manual
Protective equipment
Always to be worn:
Description / explanation
Clean the connecting pipe
Flush the measuring chamber with warm water.
Clean pressure relief chamber
Flush the pressure relief chamber with warm water.
®