Table of Contents
Advertisement
Display Panel
$ Menu Selection Screen
This is the screen for selecting each type of menu.
Menus are displayed in the lower register of the main
screen.
Each screen can be called up by selecting a function
button.
Adjacent patterns can be shown by using cursor
button [ # ] or [ 2 ].
Menu Selection Screen Pattern 1
1
2
3
6
7
8
Menu Selection Screen Pattern 2
1
2
3
;
>
?
Displays common to the 2 patterns
The contents from 1 to 5 are the same as for the
main screen.
: [F5] MAIN
When the [F5] button is pressed, main screen
pattern 1 is restored.
< Previous pattern display
Shows that there is a screen pattern to display.
When cursor button [ # ] is pressed, the previous
screen pattern is displayed.
Example:
When currently at pattern 2, the change is from
pattern 2 to pattern 1.
= Next pattern display
Shows that there is a screen pattern to display.
When cursor button [ 2 ] is pressed, the next screen
pattern is displayed.
Example:
When currently at pattern 1, the change is from
pattern 1 to pattern 2.
Menu Selection Screen Pattern 1
6 [F1] CLIP
7 [F2] MANU
4
5
4 4
8 [F3] HDD
9
:
=
4
5
<
9 [F4] LOG
3 3
@
:
Menu Selection Screen Pattern 2
; [F1] END
> [F2] CH
? [F3] CONF
@ [F4] VER.
20
When the [F1] button is pressed, the CLIP display
screen is shown.
See the CLIP display screen for details.
When the [F2] button is pressed, the simplified
manual operation screen is shown.
See the simplified manual operation screen for
details.
When the [F3] button is pressed, the HDD status
display screen is shown.
See the HDD status display screen for details.
When the [F4] button is pressed, the error log
display screen is shown.
See the error log display screen for details.
When the [F1] button is pressed, the final settings
screen is shown.
See the final setting screen for details.
When the [F2] button is pressed, the channel
setting screen is shown.
See the channel setting screen for details.
When the [F3] button is pressed, the parameter
setting screen is shown.
See the parameter setting menu for details.
When the [F4] button is pressed, the version
display screen is shown.
See the version display menu for details.
Advertisement
Table of Contents
