Download Print this page
Sealey SAC125 Manual

Sealey SAC125 Manual

Commercial portable air cooler

Advertisement

Quick Links

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
instructions
1. SAFETY
ELECTRICAL SAFETY
WARNING! It is the user's responsibility to check the following:
Check all electrical equipment and appliances to ensure that they are safe before using. Inspect power supply leads, plugs and all
electrical connections for wear and damage. Sealey recommend that an RCD (Residual Current Device) is used with all electrical
products. If the product is used in the course of business duties, it must be maintained in a safe condition and routinely PAT
(Portable Appliance Test) tested.
Electrical safety information: it is important that the following information is read and understood.
1.0.1.
Ensure that the insulation on all cables and on the appliance is safe before connecting it to the power supply.
1.0.2.
Regularly inspect power supply cables and plugs for wear or damage and check all connections to ensure that they are secure.
1.0.3.
Important: Ensure that the voltage rating on the appliance suits the power supply to be used and that the plug is fitted with the
correct fuse - see fuse rating in these instructions.
DO NOT pull or carry the appliance by the power cable.
8
DO NOT pull the plug from the socket by the cable.
8
DO NOT use worn or damaged cables, plugs or connectors. Ensure that any faulty item is repaired or
8
replaced immediately by a qualified electrician.
1.0.4.
This product is fitted with a BS1363/A 3 pin plug.
If the cable or plug is damaged during use, switch the electricity supply and remove from use.
Ensure that repairs are carried out by a qualified electrician.
Replace a damaged plug with a BS1363/A 3 pin plug. If in doubt contact a qualified electrician.
A) Connect the GREEN/YELLOW earth wire to the earth terminal 'E'.
B) Connect the BROWN live wire to the live terminal 'L'.
C) Connect the BLUE neutral wire to the neutral terminal 'N'.
Ensure that the cable outer sheath extends inside the cable restraint and that the restraint is tight.
Sealey recommend that repairs are carried out by a qualified electrician.
1.1.
GENERAL SAFETY
Only use as described in this manual.
9
DO NOT immerse the unit , plug or cord in water or spray with liquids. DO NOT place vases or similar objects filled with liquids near
8
the unit.
DO NOT use the unit within the immediate vicinity of water, such as bathtubs, wash bowls, swimming pools etc. where the
8
likelihood of immersion or splashing could occur.
Children should be supervised to ensure that they do not play with the appliance.
9
Turn the unit off and unplug it from the mains when: not in use; when moving the unit from one location to another and before
9
Maintenance or Cleaning.
DO NOT operate in the presence of explosive and/or flammable liquids or plugs.
9
DO NOT use the unit near an open flame, cooking or other heating appliance.
8
DO NOT operate the unit with a damaged cord or plug, or if the product malfunctions or is damaged in any way.
8
Avoid contact with moving parts. DO NOT insert anything through the grill when the unit is operating.
9
The use of attachments is not recommended and may be hazardous.
9
Place the unit on a dry level surface to avoid overturning.
9
DO NOT operate if the housing is damaged.
8
DO NOT cover the grill, or operate in close proximity to curtains etc. Ensure there is adequate ventilation around the unit.
8
If the mains lead needs to be replaced, ensure it is carried out by a suitably qualified person.
9
If the unit is not working properly contact a qualified technician for repair. Never attempt to dismantle the unit.
9
Never install or store the unit where it could be subject to:
9
a. Heat sources such as radiators, heat registers, stoves or other products that produce heat
b. Direct sunlight
c. Mechanical vibration or shock
d. Excessive dust
e. Lack of ventilation, such as a cabinet or bookcase
f. Uneven surfaces
DO NOT leave the product running unattended.
8
© Jack Sealey Limited
COMMERCIAL PORTABLE AIR COOLER
SAC125
MODEL NO:
Original Language Version
Replacement fuse
rating:13Amp
SAC125 Issue 1 12/01/23

Advertisement

loading

Summary of Contents for Sealey SAC125

  • Page 1 SAC125 MODEL NO: Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
  • Page 2: Specification

    4. ASSEMBLY Take out unit carefully from package, check the product to see if any part is damaged, if so contact your Sealey stockist immediately. Before use of the product, the product needs to be assembled as in the fig.1...
  • Page 3: Maintenance And Cleaning

    Close the drain valve and reinstall drain plug and the cooling pad set after finishing maintenance. 6.1.8. Cleaning the cooling pad: fig.5 fig.5 fig.6 fig.6 fig.7 fig.7 A. Pull out filter net. (fig.5) B. Lift the cooling pad gently and remove it. (fig.6) © Jack Sealey Limited Original Language Version SAC125 Issue 1 12/01/23...
  • Page 4: Troubleshooting

    6.2. INSIDE CLEANING TASKS Clean the fan blades, float ball valve, water tank, water level sensor, water pump and drainage plug. fig.8 fig.8 TROUBLESHOOTING © Jack Sealey Limited Original Language Version SAC125 Issue 1 12/01/23...
  • Page 5: Environment Protection

    BATTERY REMOVAL: SEE SECTION 6.5.3 Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products containing batteries (as defined within these regulations), that they are registered with Valpak’s registered compliance scheme. Jack Sealey Ltd Batteries Producer Registration Number (BPRN) is BPRN00705.