Installer Settings
Adjust ECO Parameters:
• Cooling: Power on the unit . Adjust set temperature to
86°F . Press and hold FAN and TEMP+ for 5 seconds . The
minimum allowable set temperature will be displayed in the
top right corner . Use TEMP+/- to change the parameter,
then press FAN save . The default minimum temperature is
73°F .
• Heating: Power on the unit . Adjust set temperature 60°F .
Press and hold FAN and TEMP- for 5 seconds . The
maximum allowable set temperature will be displayed in the
top right corner . Press TEMP+/- to change the parameter,
then press FAN to save . The default maximum temperature
is 79°F .
• Dry (Dehumidification) ECO parameters are the same as
Cooling .
Child Lock:
• Press and hold TEMP+ and TEMP- for 5 seconds to
activate/deactivate the Child Lock function . When the Child
Lock function is active,
will appear .
10