Table of Contents
Advertisement
7. A QR code displays. Scan it to download the NutriU
app.
Tip
• You can also download the NutriU app from the App
Store or from the website www.philips.com/nutriu.
Alternatively, you can scan the QR code in the booklet
which comes in the pack of your Air Cooker.
8. Open the NutriU app and follow the registration process.
9. Select the connected Air Cooker in your profile under "My Appliances".
10. Follow the steps in the App to connect your Air Cooker to your WiFi and
pair your Air Cooker with your smart device.
Note
• If you decide to connect your Air Cooker later, you can start the WiFi setup
process under "Tools → Settings → setup WiFi" in the Air Cooker menu.
• You can only use the Air Cooker with the app when the WiFi indicator beside
the display is solid white.
The WiFi indicator has two states.
The WiFi indicator is off.
The WiFi indicator is on.
Important
• Remote control: you can remotely control your Air Cooker through the
app (e.g. send a recipe, pause cooking, etc.) only if you have checked
off the "remote consent" in the NutriU app, to be found in your NutriU
profile.
• Make sure to connect your Air Cooker to a 2.4 GHz 802.11 b/g/n home
WiFi network.
• Single user pairing: the Air Cooker can be remotely controlled by only
one user at the same time. If a second user wants to control the Air
Cooker and use the NutriU app, this user has to follow the pairing
process. Once paired, the first user will be unpaired automatically.
• The WiFi setup process can be cancelled via the app or by unplugging
the Air Cooker.
Note
• You can turn WiFi on or off in Tools → Settings → WiFi Setup.
• You can reset WiFi in Tools → Settings → WiFi Setup.
12
English
WiFi is disabled.
WiFi is enabled and connected to the router.
Download app, follow
instructions
www.philips.com/nutrimax
OK
Advertisement
Table of Contents
