Description; Product Characteristics - Siemens SIMATIC NET PS598-1 Compact Operating Instructions

Description

3.1

Product characteristics

Power supply units
Type
PS598-1
Note
Two connectors for the 24 VDC output voltage
The PS598-1 has two connectors with the output voltage 24 VDC. Note that you can only use one
connector on the front or the connector on the rear of the PS598-1. You cannot operate the
device with the connectors on the front and rear at the same time.
Note
Requirement for connecting at the rear
Note that the connector on the rear of the PS598-1 can only be used if the power supply is
mounted on the SCALANCE XR500.
Note
Replacing the filter pad
To replace the filter pad, use the material Viledon P 15/150 G2 EN 779. The dimensions of the
filter pad are 38 x 135 x 8 mm (H x W x D).
Components of the product
The following parts make up the components of the PS598‑1:
• 4-pin terminal block for the 24 VDC power supply.
• 2 mounting brackets
• 8 screws (M3 x 6 countersunk, drive: Torx) for mounting the fixing brackets for 19" rack
installation
• Compact operating instructions
Power supply unit PS598-1 for SCALANCE XR-500
Compact Operating Instructions, 02/2023, A5E03275848-05
Power Input voltage
300 W 100 to 240 VAC
Output voltage Article number
24 VDC 6GK5 598-1AA00-3AA0
3
9