...2 MATH CONFIGURATION
2.2.3 Configure Mass Flow Math Block
10
Mass Flow 1 or 2 Input
Select the source required for input A (input A is the input from volume flow or differential
pressure).
For description of sources, refer to APPENDIX 1.
Temperature Input
Select the source required for the temperature input.
Temperature Units
Select the input source temperature units:
Degrees C – temperature input source measured in °C
Degrees F – temperature input source measured in °F
Absolute
– temperature input source measured in degrees absolute (°K or °R)
Reference Temperature Decimal Point
Set the number of decimal places required for the reference temperature below, between 0 and
3 places.
Reference Temperature
Set the value that represents the reference temperature, between 0 and +9999.
Continued on next page.