2 MATH CONFIGURATION...
...2.2.3 Configure Mass Flow Math Block
Pressure Input
Select the source required for the pressure input.
For description of sources, refer to APPENDIX 1.
Reference Pressure Decimal Point
Set the number of decimal places required for the reference pressure below, between 0 and 3
places.
Reference Pressure
Set the value that represents the reference pressure, between 0 and +9999.
Scaling Constant Decimal Point
Set the number of decimal places required for the scaling constant (k) below, between 0 and 3
places.
Scaling Constant
Set the value that represents the scaling constant (k), between 0.00 and +99.99.
See Section 2.2.
11