Configure Standard Math Block - ABB C1300 User Manual Supplement

...2 MATH CONFIGURATION

2.2.1 Configure Standard Math Block

8
Math Block x.Element 1 (Operand 1)
Select the source required for element 1.
For description of sources, refer to APPENDIX 1.
Math Block x.Element 2 (Operator 1)
Select the operator required for element 2:
End
– select to end math block if seven elements are not required
Add
– add
Subtract
– subtract
Multiply
– multiply
Divide
– divide
High Select – high select
Low Select
– low select
Median Sel
– median select
Note. If is selected for element 2, elements 4 and 6 are set automatically to
Median Sel
and respectively.
Sel End
Math Block x.Element 3 (Operand 2)
Select the source required for element 3.
Math Block x.Element 6 (Operator 3)
Select the operator required for element 6.
Math Block x.Element 7 (Operand 4)
Select the source required for element 7.
See Section 2.2.
Median