Toner Smears Or Print Comes Off/Stain On Back Side - Epson AcuLaser CX17 Series User Manual

Toner Smears or Print Comes Off/Stain on Back Side

Problem
Toner smears or print comes off.
The output has stain on the back side.
Note:
If the problem continues even though you have taken suggested actions described above, contact the
Epson local representative office or an authorised dealer.
Action
The print media surface may be uneven. Try changing the Paper Type setting in the
print driver. For example, change Plain to Lightweight Cardstock.
1. On the Paper/Output tab in Printing Preferences of the print driver, change the
Paper Type setting.
Verify that the correct print media is being used.
If not, use the print media recommended for the printer.
See Also:
"Usable Print Media" on page 116
Adjust the temperature of the fusing unit.
1. Launch the Printer Setting Utility, and click Adjust Fusing Unit on the Printer
Maintenance tab.
2. Adjust the fixing temperature by turning up the value for your printing media.
3. Click the Apply New Settings button.
Epson AcuLaser CX17 Series
Troubleshooting
User's Guide
319