Chapter 6 Copying; Loading Paper For Copying; Preparing A Document - Epson AcuLaser CX17 Series User Manual

Chapter 6
Copying

Loading Paper for Copying

The instructions for loading print documents are the same whether you are printing, faxing, or
copying. (The fax feature is available only on the Epson AcuLaser CX17NF/CX17WF.)
See Also:
❏ "Usable Print Media" on page 116
❏ "Loading Print Media" on page 118

Preparing a Document

You can use the document glass or the Automatic Document Feeder (ADF) to load an original
document for copying, scanning and sending a fax. (The ADF and fax feature are available only on the
Epson AcuLaser CX17NF/CX17WF.) You can load up to 15 sheets of 64 gsm documents for one job
using the ADF or one sheet at a time using the document glass.
Important:
❏ Avoid loading documents that are smaller than 148.0
×
215.9 355.6 mm (8.5
transparencies, or documents having other unusual characteristics in ADF.
❏ Carbon-paper or carbon-backed paper, coated paper, onion skin or thin paper, wrinkled or creased
paper, curled or rolled paper or torn paper cannot be used in ADF.
❏ Do not use the documents with staples, paper clips or exposed to adhesives or solvent based materials
such as glue, ink and correcting fluid in ADF.
Note:
To get the best scan quality, especially for color or gray scale images, use the document glass instead of the
ADF.
×
14 inch), different sizes or weights together, booklets, pamphlets,
Epson AcuLaser CX17 Series
× ×
210.0 mm (5.83 8.27 inch) or larger than
User's Guide
Copying 156