NorthStar 2505 Installation Manual page 24

SECTION TWO Installing and interfacing the 2505
Connecting the 2505 to
Page 14
Figure 1: 2505 case and mounting dimensions
power
WARNING!
CAUTION!
Be sure to ground the equipment to prevent
electrical shock and mutual interference.
Be sure that the power supply's voltage is
compatible with the 2505's voltage rating (10 to 40
volts DC). Connecting to the wrong power supply
can result in fire or damage to equipment.
Before applying power to the 2505, double-check
all the wiring. A small, but significant number of
units sustain damage due to incorrectly wired
connections. Such damage is not covered under
warranty. Be sure you don't apply primary voltage
directly to any of the 2505's signal input/output
wires as this may vaporize circuit board conductors
in the 2505.
2505 INSTALLATION MANUAL, Revision A