General Parameter Setting - GE AutoSigma 3000 DL Technical Reference, Operating Manual

Preparation for operation
Step
7 Increment D1 value to 6.
8
Move back to parameter
fi eld.
9 Enter the values for D2, D3 and D4
using the same method.
10 Store these settings
in the internal memory
(Single beep will occur
when complete).
11 Return to normal mea-
surement mode (ready
for set probe routine).
3 - 6
Key Display
long
press
Issue 04, 06/2007

3.5 General parameter setting

E.g. changing language to German (D) from Off condi-
tion.
H Note:
This sequence is used to set any of the adjustable
menu parameters as listed in section 3.6.
General parameter setting
AutoSigma 3000