Probe Identifi Cation - GE AutoSigma 3000 DL Technical Reference, Operating Manual

Preparation for operation
If an instrument reset is carried out the Probe data will
be returned to "5555" or "55" thus requiring the probe
code number/s to be re-entered.
3 - 4
3.3 Probe identifi cation
12.7 mm Probe: Dual Frequency 60 and 500 kHz
(L/H) has a four-digit code (see below).
Probe code shown
8 mm Probe: Single Frequency 500 kHz (H) only, has
a two-digit code.
Probe code shown
Issue 04, 06/2007
Probe identifi cation
here on the display.
here on the display.
AutoSigma 3000