ABB RELION REX640 Operation Manual page 130

Commissioning
6.
130
In the Relay address dialog box, type the relay's address found in
Configuration > Communication > Ethernet > Network1 address and tap OK.
The LHMI connects to the relay through the station port.
Figure 107: Typing the relay IP address
Table 25: Example of communication settings for the local HMI connection
through station network
Parameter
HMI communication pa-
rameter
REX640 communication
parameters
Service PC network
adapter for HMI service
port
Main Unit Port/Automatic Address
Main Unit Port/Address
Main Unit Port/Netmask
Main Unit Port/Gateway
Main Unit Port/Gateway Address
Service Port/Address
Service Port/Netmask
Service Port/Enable DHCP server
Configuration/Communication/ Ether-
net/Network1/IP address
Configuration/Communication/ Ether-
net/Network1/Subnet mask
IP address
1MRS759118 D
Value
Not checked
192.168.2.123
255.255.255.0
Not checked
-
192.168.1.1
255.255.255.0
Checked
192.168.2.10
255.255.255.0
Obtain automatical-
ly
REX640
Operation Manual