Operation; Charging The Battery Pack - Toro 68810 Operator's Manual

Operation

Charging the Battery Pack

Important:
The battery pack is not fully charged when you purchase
it. Before using the tool for the first time, place the battery pack in
the charger and charge it until the LED display indicates the battery
pack is fully charged. Read all safety precautions.
Important:
Charge the battery pack only in temperatures that are
within the appropriate range; refer to
(page 14).
Note:
At any time, press the battery-charge-indicator button on the
battery pack to display the current charge (LED indicators).
1. Ensure that the vents on the battery and charger are clear of any
dust and debris.
1. Battery pack cavity
2. Battery pack venting areas
3. Battery pack terminals
4. Battery-charge-indicator button
2. Line up the cavity in the battery pack
the charger.
3. Slide the battery pack into the charger until it is fully seated
Charging the Battery Pack
Figure 4
5. LED indicators (current charge)
6. Handle
7. Charger LED indicator light
8. Charger venting areas
(Figure
14
4) with the tongue on
(Figure
g290533
4).