Table of Contents
Advertisement
(3) Connecting V.24, V.35, or X.21 Line Interface Cables
Caution:
!
Insert a connector and fasten it with screws.
V.24, V.35, or X.21 Synchronous Serial Port
Figure 4-44 Connection of V.24, V.35, X.21 Line Interface Cables
(4) Connecting ATM155 Optical Fiber Cables
Insert the SC2 connector until you feel it click into place. (It can be removed easily by
just pulling on it.)
ATM155 Interface
Figure 4-45 Connection of OC-3c, ATM155 Optical Fiber Cables
GR2K-GA-0007
Rev. 5.00
Do not over-tighten attachment screws when connecting a cable to it's
mating connector. Over tightening the screws could cause them to break off.
Use only your fingers or a small, flat-blade screwdriver to tighten the screws.
HDRA 68-Pin Connector
SC2 Connector
Attachment Screws
Setup
4-29
Advertisement
Table of Contents
