Figure 4-11 Installation Of The Gr2000-Bh Into An Open Rack; Figure 4-12 Attachment Of A Router To An Open Rack - Hitachi GR2000-B Series Installation Manual

Step 3. Install a router into an open rack.

Figure 4-11 Installation of the GR2000-BH into an Open Rack

DANGER:
Note: For cooling conditions required for rack mounting, see 2.9, "Cooling
*
Considerations," on page 2-9.
Step 4. Fix a router to an open rack.
Open Rack

Figure 4-12 Attachment of a Router to an Open Rack

*
Note: Use the M5 screws supplied when attaching the router to the rack.
GR2K-GA-0007
Rev. 5.00
Open Rack
Make sure that the router is in a stable position when mounting it into the
rack. If not, the router could fall and cause physical injury and damage to
itself and other equipment.
M5 Screws to Attach the Router
Guide Bracket (R)
(2 pieces each side)
Rack-Mounting
Bracket (R)
Installation
Detail
Installation Detail
Setup
4-11